The Radii Trim System

RadiiTrim System components provide a simple, convenient, and efficient way to handle radius treatments on the job-site. No more expensive extruded metal column rings, radius reveal moldings or wall angles - EVER!!!

radiiprofile.jpeg


APPLICATION INFORMATION - MINIMUM RADIUS

P/N800-1C800-2C800-3800-4800-6
Inside
Radius
15”24”*30”*54”*30”
Outside
Radius
15”24”30”36”30”

*NOTE: NEW & IMPROVED CAPABILITIES

All RadiiTrim System wall angles can be used for OUTSIDE radius treatments, such as column rings, WITHOUT special tools.

ONLY INSIDE RADIUS TREATMENTS REQUIRE A HEAT GUN.

ALL RADiiTrim wall angles are so versatile that they can be used for both inside and outside radius applications, including compound (S-shaped) radius applications.

radiisystem.jpg

MOST APPLICATIONS ARE OUTSIDE RADIUS TREATMENTS SUCH AS COLUMN RINGS AND DO NOT REQUIRE THE USE OF A HEAT GUN.

heatgun-applied.jpg

On inside radius treatments the horizontal leg (i.e., the one showing after installation) will ripple and become uneven when installed. THIS IS NORMAL.

These ripples can be removed by using any standard heat gun. Start at ONE END of the installed wall angle, and direct the hot air on the rippled leg. Use a smooth stroking motion when applying the heat. The ripples will shrink and disappear to form a perfect inside radius.

VIEW INSTALLATION INSTRUCTIONS

Retail Price Sheet Radii Trim System

CALL 1-800-842-9557 or TEXT 817-300-8244 for pricing.

Sample Specification

The wall angle for radius treatments shall be as manufactured by Radii Systems (800-842-9557) from proprietary resins that have the following technical characteristics:

Property800-3/800-4/800-6800-1C / 800-2C
Hardness:(Shore A, +/-)
Instantaneous
9696
Specific Gravity (+/-.02)1.311.31
Tensile (PSI)>3000>3000
100% Modulus (PSI)>1900>1900
Elongation %<200<200
Ignitability (ASTM D1929)346 deg. C.330 deg. C.

Flammability (LOI/ASTM D2863)

45-4946-48
Flame Spread (ASTM El 62)1012

Hazardous Material Data Sheet

We have thoroughly investigated the requirements of the Occupational Safety and Health Administration 29CFR Part 1910.1200 (Hazard Communication). This has involved numerous meetings and seminars, including both industry and government agency representatives.

As a result of these efforts, we have determined that our vulcanized products, including calendared sheets, extrusions, and molded parts, are considered “ARTICLES”. A MATERIAL SAFETY DATA SHEET IS NOT REQUIRED FOR ITEMS MEETING THE “ARTICLE” category definition.

If you have occasion to procure UNVULCANIZED (UNCURED) materials from us, we are obligated to furnish a Material Safety Data Sheet for this uncured product and we are prepared to do so.

NOTE: RadiiTrim System Wall angles are designed solely as a TRIM system. To the best of our knowledge our testing of these products is reliable; however, WE CANNOT WARRANTY APPLICATIONS FOR WHICH THE PRODUCT IS NOT DESIGNED.

Distributors and Dealers

Contact factory (800-842-9557) for the name of your LOCAL DISTRIBUTOR/DEALER.

Distributor/Dealer Inquiries Welcome!